Modular Lighting Instrument | Wall Impulse Round Decorative Light [Variety Finishes]
Modular Lighting Instrument | Wall Impulse Round Decorative Light [Variety Finishes]
Circular shaped LED luminaire for wall mounting. Consisting of a housing that holds a printed circuit board fitted with 4 high power LEDs. The LEDs are placed on the printed circuit board in line, but at irregular intermediate distances, resulting in light beam shape that plays with light and shadow. The LED PCB is treated with a parylene coating to protect the LED chips from dust and moisture. The body holds the electronic constant current LED driver, either trailing edge, 1-10V, pushdim or DALI dimmable. Also a driver excluded version is available. The backside of the body holds the galvanized steel wall bracket by means of 2 magnets. Both available in IP20 (for use in indoor dry locations) and IP44 (for use in indoor damp or wet locations) protection grade. No visible wires after installation.
2700K IP20 Trailing Edge Black Structure 13770032 | Grey White 13770036 || Dali Black Structure 13770232 | Grey White 13770236 || 1-10V Black Structure 13770432 | Grey White 13770436
2700K IP44 Black Structure 13770632 | Grey White 13770636
3000K IP20 Trailing Edge Black Structure 13770132 | Grey White 13770136 || Dali Black Structure 13770332 | Grey White 13770332 || 1-10V Black Structure 13770532 | Grey White 13770536
Technical Characteristics
• Dimensions: ø145mm, height 25 mm/80mm • Printed circuit board with 4 high power LEDs • Colour temperature: 2700 K or 3000 K • CRI 90+ • 3SDCM • Luminaire output: 630lm (for 3000 K, white, mains dimmable) • Luminaire efficiency: 90% • Power consumption: 7.5W (driver included), 84lm/W, 5.5W (driver excluded) • Built-in LED driver, mains (trailing-edge) dimmable, DALI, 1-10V or pushdim, • Also available LED driver excluded, choose from driver matrix for suitable dimensions, wattage and type of dimming • Warranty period: 5 years on LED, 2 years on drivers • Power: 220-230 V, 50-60 Hz, or to be connected to a constant current LED driver • Class 1 (driver included version), Class 3 (driver excluded version) • Only for indoor use • Glow wire rating 960°C • Lifetime: L80B10 @50.000 hours
Materials
Aluminum housing finished with a scratch resistant fine textured powder coating in white or matt black • Wall plate: galvanized steel • Printed circuit board: aluminum